Air Tools

United Rentals has the air tools you need. Air equipment like air drills and air hammers are ideal for construction or demo jobs. Our general air tools are designed to reduce air consumption without reducing power, so you can run multiple tools with one compressor unit. United Rentals' full inventory of air tools includes air backfill tampers, air chipping guns/chipping hammers, air pavement breakers of multiple power levels, air rivet busters, air rock drills of various drilling, and blowing power levels for demolition work. Complete your cutting, finishing and surface preparation with finish air nailers, air staplers, clay diggers, grinders, saws and more.

 

FAQs

What does CFM stand for?

  • CFM stands for cubic feet per minute. CFM is a rating for how much air a tool needs to operate without performance drop. Without an adequate volume of air supply, or CFM of air, the tool will spin, hit, or run with less force or speed.

How much CFM do I need?

  • The CFM need greatly depends on the air compressor and the air tool. On average, you need 1 CFM per square foot (1 CFM/sq. ft.) of floor area.

What's the difference between CFM and SCFM?

  • SCFM stands for standard cubic feet per minute. SCFM is the volumetric flow rate against a standard, whereas there’s no standard for CFM.
Cat Class Code
110-1270

Air Rock Drill, 5-10 lbs.

  • Easy operation with one-touch control for drilling and blowing
  • Lightweight and flexible
  • Continuous hole cleaning at all drilling speeds
Cat Class Code
110-1815

Air Stapler, Hardwood Flooring

  • Easy to operate
  • Lightweight and portable
  • Durable construction for ideal performance
Cat Class Code
110-0995

Blow Knife Air

  • 375 cpm air compressor
  • Aluminum frame, weighs 9.5 lbs
  • 333 cfm at 90 psi
Cat Class Code
110-1510

Brad Nailer Air 5/8"-1 5/8"

  • Tool-less adjustable depth control
  • Sequential or bump-fire trigger
  • 360° adjustable exhaust port available
Cat Class Code
110-1440

Coil Roofing Air Nailer

  • Convenient tool-free depth adjustment
  • Advanced in-line self-cleaning air filter
  • Single-action side load for quick and easy reloading
Cat Class Code
110-6030

Drill Slab Rider Pneumatic Dowel 1 Gang

  • Stich or drill horizontally, vertically or at an angle
  • Auto-alignment for fast, easy repositioning
  • Feed system for friction-free drilling
Cat Class Code
110-1520

Finish Air Nailer

  • Shoots 1" up to 2-1/2" long, 15 or 16 gauge finish nails
  • Easily switchable between bump and sequential fire
  • Convenient carrying case included case included
  • Choose between straight or angled models
Cat Class Code
110-1530

Finish Nailer Air 2"

  • Tool-free adjustable depth control
  • Sequential trigger
  • Tool-free jam release for easy clearing
Cat Class Code
110-1251

Grinder Straight Air 3/8"-5/8" Spindle

  • Pneumatic powered with lever throttle
  • 12,000 rpm free speed
  • Safety lock and side exhaust for protection
  • 37 cfm at 90 psi
Cat Class Code
110-1387

Impact Wrench Air 1 1/2" Hd Square Drive

  • Rear grip handle with inside trigger
  • Twin hammer mechanism for more power
  • Integral muffler
  • Titanium hammer case
Cat Class Code
110-1390

Impact Wrench, Air, 2 1/2"

  • Dead handle with lever throttle
  • Up to 50000 ft/lbs torque
  • Cast iron hammer case
Cat Class Code
110-1350

Impact Wrench, Air, 3/8"

  • Butterfly throttle for easy directional changes
  • 360° swivel air inlet
  • Compact, heavy-duty and durable
Cat Class Code
110-1500

Nailer Air 2"-3 1/2"

  • Lightweight at just 7.5 lbs
  • Impact-resistant exhaust deflector
  • Tool-less adjustable depth control
yellow tamper product shot
Cat Class Code
290-0460

Railroad Tamper Pneumatic

  • For polishing, grinding and more
  • Lightweight and durable
  • Ergonomic grip
Air Angle Die Grinder
Cat Class Code
110-1240

Air Angle Die Grinder

  • 18-20,000 RPM motor
  • Pneumatic powered
  • Lightweight and durable
  • For cleaning and grinding where in-line grinders can't reach
  • Add this die grinder to your cart now
90 Degree Air Grinder
Cat Class Code
110-1253

Air Angle Grinder, 4 in., 90 degree

  • For blending, grinding, smoothing and more
  • Side, front or 360-degree directional exhaust
  • Variable speed control
  • Average 10 CFM at 90-120 psi
  • Uses: Ideal for fast weld and stock removal, rust and scale removal, heavy deburring
  • Add this angle grinder to your cart now
Cat Class Code
110-0009

Air Angle Grinder, 7 in., 90-degree

  • 7" wheel diameter
  •  Side handle to provide improved ergonomics for specific application
  • Lever throttle control
  • Side, front or 360-degree directional exhaust
  • Uses: Ideal for fast weld and stock removal, rust and scale removal, heavy deburring
  • Add this angle grinder to your cart
Cat Class Code
110-1255

Air Angle Grinder, 7 in., 90-degree

  • 7" wheel diameter
  •  Side handle to provide improved ergonomics for specific application
  • Lever throttle control
  • Side, front or 360-degree directional exhaust
  • Uses: Ideal for fast weld and stock removal, rust and scale removal, heavy deburring
  • Add this angle grinder to your cart
Backfill Tamper Pack Shot
Cat Class Code
110-1830

Air Backfill Tamper

  • Length 52"
  • Up to 670 bpm
  • Ideal for backfilling holes, packing asphalt and compacting soil
  • Durable steel tamping plate
  • Add this backfill tamper to your cart now
Cat Class Code
110-1000

Air Blow Gun Attachment

  • Attaches to compressed air hose
  • Clear work areas easily and cleanly with compressed air
  • Lengths vary
  • Designed for 1/4" inlet hose
  • Uses: Ideal for blowing stubborn debris, dust, water, and more off of all kinds of materials and machinery
  • Add this blow gun to your cart now
Air Chipper Pack Shot
Cat Class Code
110-1100

Air Chipping Hammer

  • Lightweight and portable length 15 1/4"
  • Between 1,850 and 2,350 bpm
  • Easily adjusted rotating exhaust deflector
  • Use Cases: Ideal for light- to medium-duty demolition of welding, concrete and mortar
  • Add this chipping hammer to your cart now
  • Additional charges apply for points, chisels and miscellaneous tool steel
  • United Rentals will contact you to confirm requirements
Air Flux Chisel Curved
Cat Class Code
110-1310

Air Chipping Hammer Flux Chisel Attachment, Curved

  • Remove weld flux, rust, scale or other coatings
  • Ergonomic curved attachment to reach areas over obstacles
  • Accessory for pneumatic chipping hammers
  • Durable construction
  • Add this flux attachment to your cart now
Air Flux Chisel Straight
Cat Class Code
110-1320

Air Chipping Hammer Flux Chisel Attachment, Straight

  • Remove weld flux, rust, scale or other coatings
  • Straight attachment
  • Accessory for pneumatic chipping hammers
  • Durable construction
  • Add this flux attachment to your cart now
APT Clay Digger Pack Shot
Cat Class Code
110-1130

Air Clay Digger

  • Ideal for digging clay, shale or frozen ground
  • Between 1,850 and 2,350 bpm
  • Inside or three-finger trigger
  • Compact hand-held equipment
  • Add this clay digger to your cart now
Concrete Scabbler
Cat Class Code
110-1150

Air Concrete Scabbler, 3 Head

  • Ideal for removing concrete or epoxy, surface preparation and leveling concrete
  • Compact and lightweight hand-held equipment
  • Up to 3,000 bpm
  • Low vibration for reduced strain on operator
  • Add this concrete scabbler to your cart now
Air Concrete Scabbler 5 Head
Cat Class Code
110-1170

Air Concrete Scabbler, 5 Head

  • Ideal for removing concrete or epoxy, surface preparation and leveling concrete
  • Compact and lightweight walk-behind equipment
  • Up to 3,000 bpm
  • Low vibration for reduced strain on operator
  • Add this concrete scabbler to your cart now
Air Drill
Cat Class Code
110-1276

Air Drill, 1/2 in. Chuck

  • Pneumatic powered drill, runs on compressed air
  • Keyed or keyless chuck available
  • Variable speed throttle
  • Reversible model available
  • Add this air drill to your cart now
Air Drill
Cat Class Code
110-1272

Air Drill, 1/4 in. Chuck

  • Pneumatic powered drill, runs on compressed air
  • 1 horsepower pistol grip with aluminum inner body
  • Church guard for enhanced safety
  • Durable with rugged gearbox
  • Add this air drill to your cart now
Air Drill
Cat Class Code
110-1274

Air Drill, 3/8 in. Chuck

  • Pneumatic powered drill, runs on compressed air
  • Ideal for drilling, reaming, honing and more
  • Variable speed throttle from 1,200-2,500 RPM
  • Quick-reverse lever model available
  • Add this air drill to your cart now
Cat Class Code
110-0008

Air Grinder, 4-1/2 in.

  • Powerful 1.25 horsepower motor for fast metal removal
  • Portable and lightweight
  • Reduced vibration for more comfortable work
  • Ergonomic grip
  • Add this air grinder to your cart now
Cat Class Code
110-1288

Air Hog Ring Guns

  • Fits 3/4" C-type rings
  • Compact and lightweight
  • Fasten insulation and netting and more
  • Ergonomic grip
  • Add this hog ring gun to your cart now
Air Impact Wrench Pack Shot
Cat Class Code
110-1382

Air Impact Wrench, 1 in. Drive, #5 Spline

  • #5 spline drive
  • Comfortable D-handle with inside trigger
  • Airflow up to 85 CFM
  • Torque down or loosen fasteners quickly
  • Add this impact wrench to your cart now
Air Impact Wrench Pack Shot
Cat Class Code
110-1380

Air Impact Wrench, 1 in. Drive, D-handle

  • 1" drive
  • Comfortable D-handle outside trigger
  • Airflow up to 48 CFM
  • Torque down or loosen fasteners quickly
  • Add this impact wrench to your cart now
Air Impact Wrench Pack Shot
Cat Class Code
110-1383

Air Impact Wrench, 1 in. Drive, Pistol Grip

  • 1" drive
  • Ergonomic pistol grip
  • Airflow up to 59 CFM
  • Torque down or loosen fasteners quickly
  • Add this impact wrench to your cart now
Air Impact Wrench Pack Shot
Cat Class Code
110-1378

Air Impact Wrench, 1 in. Drive, Torque Control

  • 1" drive
  • Ergonomic pistol grip
  • Torque control for increased versatility and safety
  • Maximum torque range 915-3,305 ft.-lbs.
  • Add this impact wrench to your cart now
Air Impact Wrench Pack Shot
Cat Class Code
110-1385

Air Impact Wrench, 1-1/2 in. Drive

  • Maximum torque up to 3,500 ft.-lbs.
  • Comfortable D-handle with inside trigger
  • Airflow up to 95 CFM
  • Torque down or loosen fasteners quickly
  • Add this impact wrench to your cart now
Wrench Torque Gun Pack Shot
Cat Class Code
110-1384

Air Impact Wrench, 1-1/2 in. Drive, Torque Control

  • 1-1/2" drive
  • Ergonomic pistol grip
  • Torque control for increased versatility and safety
  • Maximum torque range 375-5,200 ft.-lbs.
  • Add this impact wrench to your cart now
Air Impact Wrench Pack Shot
Cat Class Code
110-1360

Air Impact Wrench, 1/2 in.

  • Ergonomic pistol grip
  • Ring-type socket retainer
  • 1/2" drive
  • Maximum torque up to 525 ft.-lbs.
  • Add this impact wrench to your cart now
Air Impact Wrench Pack Shot
Cat Class Code
110-1370

Air Impact Wrench, 3/4 in.

  • Ergonomic pistol grip
  • Airflow up to 59 CFM
  • 3/4" drive
  • Maximum torque up to 1,000
  • Add this impact wrench to your cart now
Air Nailer
Cat Class Code
110-1450

Air Nailer, 7/8 to 1-3/4 in., Coil

  • Tool-less adjustable depth control
  • Side-load canister for faster action
  • Lightweight at just 4.9 lbs.
  • Coil nails for extra strength in roofing or framing
  • Uses: Ideal for complete framing, fencing, roofing and more
  • Add this nailer to your cart now
Air Nailer
Cat Class Code
220-8350

Air Nailer, Flooring

  • For installing flooring cleats in hardwood floors
  • Weight range 10.6-11.2 lbs.
  • Mallet included
  • Ergonomic grip
  • Add this air nailer to your cart now
Air Nailer, Framing
Cat Class Code
110-1460

Air Nailer, Framing

  • Shoots 2" to 3-1/2"-long full-head nails
  • Lightweight and portable
  • Ideal for framing, fencing or roof work
  • Ergonomic grip and safety trigger feature
  • Add this air nailer to your cart now
Cat Class Code
110-1541

Air Nailer, Roofing

  • Toolless adjustable shingle guide and depth control
  • Lightweight and portable
  • Side-load canister for faster action
  • Ergonomic grip and safety trigger feature
  • Add this air nailer to your cart now
flux attachment for air needle scaler
Cat Class Code
110-1330

Air Needle Scaler with Flux Attachment

  • For cleaning, chipping or removing weld slag, cement, paint and more
  • Needle-chisel conversion available
  • Hardened steel needles for increased durability
  • Compact air tool
  • Add this needle scaler to your cart now
Air Flux Scaler
Cat Class Code
110-1340

Air Needle Scaler with Flux Attachment

  • For cleaning, chipping or removing weld slag, cement, paint and more
  • Hardened steel needles for increased durability
  • Compact, pneumatic powered
  • Needle-chisel conversion available
  • Uses: Intended for cleaning or peening flux, cement, paint rust or other residue
  • Add this needle scaler to your cart now
Scaling Tool Pack Shot
Cat Class Code
110-1342

Air Needle Scaling Tool

  • Designed for accessing hard-to-reach areas
  • Lightweight and compact
  • 7" needles
  • To be used with compressed air
  • Uses: For cleaning and removing weld slag, rust, paint, other coatings, chip stone, concrete, and brick
  • Add this scaler to your cart now
Cat Class Code
110-1224

Air Nutrunner

  • Lightweight and reversible
  • Compact angle head for confined-space access
  • Up to 554 ft.-lbs. of torque
  • To be used with compressed air
  • Uses: For tightening, tapping, turning valves and more
  • Add this nut runner to your cart now
Orbital Air Sander
Cat Class Code
110-1730

Air Orbital Floor Sander, Hand-held

  • Built-in silencer muffles noise
  • Adjustable regulator for speed control
  • Dual-action for swirl-free finishes
  • Ideal for heavy-duty sanding
  • Uses: Ideal for complete leveling and sanding for remodeling or construction purposes
  • Add this orbital sander to your cart now
Air Pavement Breaker Pack Shot
Cat Class Code
110-1550

Air Paving Breaker, 30 lb. class

  • Ideal for breaking up a few inches of concrete or asphalt
  • Standard hex chuck size 1" by 4-1/4"
  • Reduced kickback decreases operator fatigue
  • Use Cases: Ideal for breaking u p and removing up to a few inches of concrete or asphalt
  • Add this pavement breaker to your cart now
  • Additional charges apply for points, chisels and miscellaneous tool steel
  • United Rentals will contact you to confirm requirements
Cat Class Code
110-1551

Air Paving Breaker, 30 lbs. class, D-Handle

  • 4-bolt design for easy maintenance
  • 1.75" bore; 3.375" stroke
  • Fast tool-change retainer
  • 1,500 bpm
  • Uses: Use for light demolition work for cutting and shaping metal and breaking up rock or grout
  • Add this pavement breaker to your cart now
Air Pavement Breaker 35 lbs
Cat Class Code
110-1560

Air Paving Breaker, 35 lb. class

  • Ideal for breaking up a few inches of concrete or asphalt
  • Standard hex chuck size 1" x 4-1/4"
  • Reduced kickback decreases operator fatigue
  • Up to 1,850 bpm
  • Add this pavement breaker to your cart now
Air Pavement Breaker Pack Shot
Cat Class Code
110-1565

Air Paving Breaker, 40 lbs. class

  • For breaking concrete, frozen ground and more
  • Latch-type retainer
  • 900-1,500 bpm range
  • Four-bolt back head
  • Uses: Use for light demolition work for cutting and shaping metal and breaking up rock or grout
  • Add this pavement breaker to your cart now
Cat Class Code
110-1567

Air Paving Breaker, 50 lbs. class

  • For breaking concrete and cutting asphalt
  • 2"-2.5" bore and 4"-4-1/2" stroke
  • Swivel hose connection available
  • 50 lbs.-rated class
  • Uses: Use for light demolition work for cutting and shaping metal and breaking up rock or grout
  • Add this pavement breaker to your cart now
Air Breaker Pack Shot
Cat Class Code
110-1570

Air Paving Breaker, 60 lb. class

  • Standard hex chuck size 1-1/4" by 6"
  • Air inlet 1/2" male
  • Up to 1,680 bpm
  • Use Cases: Ideal for breaking u p and removing up to a few inches of concrete or asphalt
  • Add this pavement breaker to your cart now
  • Additional charges apply for points, chisels and miscellaneous tool steel
  • United Rentals will contact you to confirm requirements
Air Pavement Breaker
Cat Class Code
110-1580

Air Paving Breaker, 90 lb. class

  • Standard hex chuck size 1-1/4" x 6"
  • Weight 91 lbs.
  • Up to 1,350 bpm
  • Use Cases: Ideal for breaking up a few inches of concrete or asphalt
  • Add this pavement breaker to your cart now
  • Additional charges apply for points, chisels and miscellaneous tool steel
  • United Rentals will contact you to confirm requirements
Air Post Driver
Cat Class Code
110-1600

Air Post Driver

  • Ideal for fencing work or driving rods, stakes and more
  • Airflow 42 CFM at 90 psi
  • Chuck size 3-7/8" master
  • Powered by compressed air
  • Add this post driver to your cart now
Cat Class Code
110-1840

Air Rammer Tamper

  • Ideal for soils and sand compaction in trenches, surface prep and more
  • Easy to use with air compressor
  • Up to .7-1" bore and 2-2.5" stroke
  • Deliver between 870-1,600 bpm
  • Add this air rammer tamper to your cart now
Cat Class Code
110-1284

Air Ratchet Wrench, 1/2 in.

  • Durable, heavy-duty and compact
  • 50-75 ft.-lbs. of torque
  • 360-degree adjustable exhaust feature available
  • Heavy-duty and durable
  • Uses: Torque down or loosen and remove fasteners for industrial, maintenance, or automotive applications
  • Add this ratchet wrench to your cart now
Cat Class Code
110-0005

Air Ratchet Wrench, 3/8 in.

  • Anti-slip head design
  • Lightweight 2.5 lbs.
  • Heavy-duty and durable
  • Can reach narrow areas
  • Add this air ratchet to your cart now
Cat Class Code
110-1222

Air Reciprocating Saw

  • Stroke length range 5/8" to 1-1/8" provides efficient cutting
  • Up to 1,800 strokes per minute
  • Cut through railings, nails, siding and more
  • Control kickback and vibration with easy-to-grip body
  • Add this reciprocating air saw to your cart now
Rivet Buster Pack Shot
Cat Class Code
110-0013

Air Rivet Buster

  • Lightweight 30 lbs.
  • Up to 1,140 bpm
  • Air flows between 42-46 CFM at 90 psi
  • Use Cases: Remove rivets from walls and bridges for medium demolition work
  • Add this rivet buster to your cart now
  • Additional charges apply for Tool Steel
  • United Rentals will contact you to confirm your requirements
Air Rock Drill Pack Shot
Cat Class Code
110-1670

Air Rock Drill, 30-39 lbs.

  • Chuck size 7/8" x 3-1/4"
  • Deliver up to 2,300 bpm
  • Ideal for drilling anchor holes through granite or hard-faced rock in industrial applications
  • Single-lever throttle controls
  • Add this rock drill to your cart now
Air Rock Drill
Cat Class Code
110-1680

Air Rock Drill, 50-59 lbs.

  • Chuck size 7/8" x 3-1/4"
  • Deliver up to 2,100 bpm
  • Ideal for drilling anchor holes through granite or hard-faced rock in industrial applications
  • Single-lever throttle controls
  • Add this rock drill to your cart now
Air Rock Drill Pack Shot
Cat Class Code
110-1690

Air Rock Drill, 60-69 lbs.

  • Chuck size 7/8" x 3-1/4"
  • Deliver up to 2,100 bpm
  • Ideal for drilling anchor holes through granite or hard-faced rock in industrial applications
  • Three drilling speeds
  • Add this rock drill to your cart now
Cat Class Code
110-1720

Air Rock Splitter

  • Unit dimensions 19-1/4" x 18" x 12-1/2"
  • Airflow 50-80 CFM at 100 psi
  • For light to medium concrete or rock demolition
  • Vibration-free and lightweight to reduce strain on operator
  • Add this rock splitter to your cart now
silver rock splitter
Cat Class Code
110-1715

Air Rock Splitter, Heavy Duty

  • Unit dimensions 50-3/4″ long
  • Size hole required 1-3/4" and 26" deep
  • For heavy-duty demolition work
  • Vibration-free and lightweight to reduce strain on operator
  • Add this rock splitter to your cart now
Rotary Drill Hammer
Cat Class Code
110-1261

Air Rotary Hammer Drill, 1-in. Cap

  • Up to 1" diameter holes with solid carbide-tipped bits
  • Up to 3" diameter holes with carbide core bits
  • Water hookup at depth gauge to help protect against bit sparking
  • Built-in oiler for air motor
  • Add this air rotary hammer drill to your cart
Cat Class Code
110-1227

Air Scaling Hammer

  • Delivers between 3,000-3,500 bpm
  • Single-head model with pistol grip
  • Each stroke is between 2.3-2.6"
  • Ideal for removing scale, heavy corrosion and coatings
  • Add this scaling hammer to your cart now
Cat Class Code
110-1286

Air Scarifier, 2 in. - 4 in., Handheld

  • HEPA vacuum attached for dust control
  • Remove epoxy and other coatings from concrete and steel
  • 2" or 4" cutting width
  • Roto Peen abrasive included
  • Add this scarifier to your cart now
Cat Class Code
110-1305

Air Scraper Chisel Attachment, 2 in.

  • Round collar
  • 2"-wide chisel
  • Accessory for pneumatic scrapers
  • Heavy-duty steel construction
  • Add this scraper chisel to your cart now
Cat Class Code
110-1306

Air Scraper Chisel Attachment, 4 in.

  • Round collar
  • 4"-wide chisel
  • Accessory for pneumatic scrapers
  • Heavy-duty steel construction
  • Add this scraper chisel to your cart now
Cat Class Code
110-1296

Air Scraper, 5 ft.

  • 5' long, slender tool
  • Deliver up to 3,500 bpm
  • For light to medium demolition work
  • Chip away ice, remove tiles or remove carpet from floors
  • Add this air spade to your cart now
Air Die Grinder
Cat Class Code
110-1250

Air Straight Die Grinder

  • 33 horsepower, up to 25,000 RPM motor
  • Lightweight and durable
  • Pneumatic powered
  • For polishing, grinding, weld-breaking and more
  • Add this die grinder to your cart now
Wrench Torque Gun 3/4 Air
Cat Class Code
110-1377

Air Torque Wrench, 3/4 in.

  • Stretch-to-load bolting system
  • Torque range from 95-1,300 ft.-lbs.
  • 24 CFM at 75 PSI
  • Ergonomic trigger handle
  • Uses: Ideal for light construction, automotive or industrial applications
  • Add this torque wrench to your cart now
Air Breaker Pack Shot
Cat Class Code
110-1136

Air Trench Digger with T-Handle

  • Steel handle with rubber grips
  • 3-3/8" stroke, delivers up to 1,850 bpm
  • Airflow between 34-38 CFM at 90 psi
  • Uses impact force to dig trenches for phone lines, piping and more
  • Add this trench digger to your cart now
product image not available
Cat Class Code
800-1585

Demolition Hammer Chisel, 2 in., SDS Max

  • Designed for SDS Max-rated demolition work
  • 2" chisel width, length depends on model
  • Heavy-duty steel with chrome polishing
  • Accessory for demolition rotary hammers
  • Uses: Use for light demolition work for cutting and shaping metal and breaking up rock or grout
  • Add this chisel attachment to your cart now
Cat Class Code
110-0015

Impact Wrench, 1-1/2 in. Drive, #5 Spline

  • #5 spline drive
  • Comfortable D-handle with inside trigger
  • Airflow up to 95 CFM
  • Torque down or loosen fasteners quickly with maximum torque up to 2,800 ft.-lbs.
  • Add this impact wrench to your cart now
Rock Drill Air Pack Shot
Cat Class Code
110-1650

Rock Drill Air 10-19 lbs.

  • For light chipping overhead and horizontal
  • Converts to chisel only
  • Latch-type retainer, swivel hose connector
Cat Class Code
110-1289

Rotary Bristle Blaster Air Tool

  • Portable and easy to operate
  • Generates anchor profiles ranging from 2.5 to 3.3 mil also on weld seams, edges, around bolts and on surface irregularities
  • Requires an air source
  • Removes corrosion, coatings, mill scale and other contaminants — without removing healthy material
  • Uses: Ideal for coating removal, paint removal, scale removal, weld cleaning, surface decontamination, surface preparation, texturing applications and corrosion removal
  • Add this rotary bristle blaster air tool to your cart