Pipe/Conduit for Rent
Cat Class Code
200-1050
Pipe Bender, 2-1/2 in. to 4 in., Hydraulic
- Strong components can handle 2-1/2"- to 4"-gauge pipe
- Convenient extendable workspace
- Heavy-duty hydraulic power
- Conveniently makes elbows, offsets and saddles
- Uses: Ideal for bending pipes 2-1/2" to 4" gauge where hydraulic power is available
- Add this hydraulic pipe bender to your cart now
Cat Class Code
200-1150
Pipe Conduit Bender Table, 4 in., Greenlee 881
- Strong components can handle up to 4"-gauge pipe
- Convenient extendable workspace
- Locking swivel wheels
- Conveniently adjust the ram to accommodate different sizes of conduit
- Uses: Ideal for bending rigid conduit on the go
- Add this pipe bender table to your cart now
Cat Class Code
200-1200
Conduit Bender, 1/2 in. to 2 in., Powered
- Strong components can handle 1/2"-2" tubing
- Built-in wheels for easy jobsite maneuvering
- Lightweight yet durable, heavy-duty design
- Deluxe design
- Uses: Ideal for bending conduit, cable or tubes for elbows, offsets and saddles between 1/2" to 2" gauge
- Add this conduit bender to your cart now
Cat Class Code
200-1550
Conduit Bender, 1-1/4 in. to 5 in., Powered
- Strong components can handle 1-1/4" - 5" tubing
- Easy-to-use ram travel scale
- Conveniently makes elbows, offsets and saddles
- Durable steel jaws
- Uses: Ideal for bending conduit, cable or tubes for elbows, offsets and saddles between 1-1/4" to 5" gauge
- Add this conduit bender to your cart now
Cat Class Code
200-5100
Cable Puller, 10,000 lbs., Electric Powered
- Pulling speed up to 16 feet per minute (FPM) at no load
- Mobile boom accessory available
- Features high and low pulling speeds
- Easily change speeds with foot pedal
- Uses: Ideal for pulling cable through conduit for electrical or communication utilities work
- Add this cable puller to your cart now
Cat Class Code
200-7910
Pipe Bender, 1/2 in. to 2 in., Electric Powered, Programmable
- Strong components can handle 1/2"- to 2"-gauge pipe
- Programmable
- Conveniently makes elbows, offsets and saddles
- Cart travels well on wheels for increased convenience
- Uses: Ideal for bending pipes or conduit for elbows or offsets between 1/2" to 2" gauge
- Add this pipe bender to your cart now
Cat Class Code
500-0003
Flange Spreader Toe Ratchet, 15 Ton
- 15-ton capacity
- Heavy-duty and reliable
- Sturdy steel wedge for safe splitting
- Easy to control
- Uses: Spreading or separating heavy pipe flanges for petrochemical, refining, pipeline, power generation and other applications
- Add this flange spreader jack to your cart now
Cat Class Code
500-0013
Pipe Dolly
- Enables one operator to lift up to 2,000 lbs.
- Accommodates long and short pipes and conduit
- Fits through most standard doorways
- Heavy-duty and reliable construction
- Uses: Ideal for manually transporting lengths of pipe and conduit to the correct location for pipe fitting
- Add this pipe dolly to your cart now
Cat Class Code
500-0885
Pipe Fusion Machine 6-18 in., Tracks Included
- Fuse small- to medium-diameter pipes or conduit together
- Tracks included for setup in muddy or wet conditions
- Designed for fusing 6"-18" diameter polyethylene pipes
- For utilities work such as sewer or plumbing pipes
- Uses: Ideal for fusing polyethylene pipes together for utility work in muddy or wet conditions
- Add this pipe fusion machine to your cart now
Cat Class Code
500-0886
Pipe Fusion Machine 6-18 in., Wheels Included
- Fuse small- to medium-diameter pipes or conduit together
- Wheeled chassis included for maneuvering around the jobsite
- Designed for fusing 6"-18" diameter polyethylene pipes
- For utilities work such as sewer or plumbing pipes
- Uses: Ideal for fusing polyethylene pipes together for utility work
- Add this pipe fusion machine to your cart now
Cat Class Code
500-1515
Pipe Threader, 1/2 in. to 2 in., Portable, 115V Electric Powered
- Pipe Capacity: 1/8"-2" (3mm-50mm) pipe, 2-1/4"-4" with 141, and 4"-6" with 161 geared threaders; 1/4"-2" (6mm-50mm) rod
- 115V, 38 RPM
- Rear-centering device: Cam-action turns with chuck
- Recessed on/off/reverse switch
- Uses: Thread 1/2" to 2" gauge pipe in the shop or on-site
- Add this pipe threader to your cart now
Cat Class Code
500-1527
Pipe Threader, 1/2 in. to 4 in., Electric Powered
- 1/2" to 4" threading capabilities
- Steady lubrication of dies and workpiece with through-head oiling
- Heavy-duty, rugged construction
- Conveniently integral foot switch
- Uses: Thread 1/2" to 4" gauge pipe or conduit in the field or in the shop
- Add this pipe threader to your cart now
Cat Class Code
500-1621
Pipe Roller, Horizontal Beam, 24 in.
- Pipe diameter 24"
- Two rollers
- Heavy-duty steel frame
- Two rollers
- Uses: Ideal for horizontal conveyance of pipes up to 24" wide
- Add this pipe roller to your cart now
Cat Class Code
500-2600
Pipe Jeep Meter
- Conveniently battery powered
- Inspect the coatings of piping and conduit for holes
- Designed to read voltages even in rainy conditions
- Volt cable included
- Uses: Detect holes in coatings of pipes or conduit
- Add this jeep meter to your cart now
Cat Class Code
800-4375
Pipe Locator
- Locate cast iron pipe at a depth of up to 10'
- 25 hour recharge battery life
- Compact and easy to store
- Total field antenna and on-screen icons lead you right to your target
- Uses: Ideal for finding underground pipes and powerlines before beginning excavations to save time and labor
- Add this pipe locator to your cart now
Cat Class Code
850-7095
Pipe Crimper, Hydraulic
- Hydraulically operated
- 0.5-2 in. Pipe range
- Cordless for hassle-free operation
- Crimper is easily rechargeable
- Uses: Ideal securing pipe and hose connections in place
- Add this pipe crimper to your cart now
Cat Class Code
975-1040
Pipe Beveling Manual Saddle Machine, 6-12 in.
- For shop or field applications
- Precision spacer bolts, located on both sides of saddle
- Can be used with most oxy/fuel or plasma machine torches
- Use to create the angle formed between the edge of the end of a pipe or tube
- Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
- Add this pipe beveling manual saddle machine to your cart
Cat Class Code
975-1043
Pipe Beveling Manual Saddle Machine, 12-20 in.
- For shop or field applications
- Precision spacer bolts, located on both sides of saddle
- Can be used with most oxy/fuel or plasma machine torches
- Use to create the angle formed between the edge of the end of a pipe or tube
- Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
- Add this pipe beveling manual saddle machine to your cart
Cat Class Code
975-1044
Pipe Beveling Manual Saddle Machine, 20-26 in.
- For shop or field applications
- Precision spacer bolts, located on both sides of saddle
- Can be used with most oxy/fuel or plasma machine torches
- Use to create the angle formed between the edge of the end of a pipe or tube
- Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
- Add this pipe beveling manual saddle machine to your cart