Welder Accessories for Rent
With a tool rental fleet that includes a full line of arc welders and welder accessories, we’re sure to have the parts you need to customize your welder and get the job done safely and efficiently. And with 24/7 customer support, United Rentals experts are here to assist you — day or night.
FAQs about Welder Accessories
What are the tools and equipment used in welding?
- In addition to the welding machine, you’ll need the following tools and equipment to ensure your safety. For personal equipment, some recommended items are safety goggles, an auto-darkening welding helmet, welding shoes, welding gloves, a welding jacket and ear protection. For welding tools, some recommended items are measuring tools, welding clamps, a chipping hammer, a wire brush, MIG pliers, a soap stone, a sheet metal gauge and an angle grinder. These two lists are in no way exhaustive. Please call United Rentals experts to learn more about the tools you need for your project.
What is a gouging torch?
- An air arch gouging torch is used in gouging, joint preparation, crack and pore removal, chamfering, cutting, surface treating, and hole piercing of all metals.
What metal cannot be welded?
- Most metals can be welded; however, certain methods of welding yield better results for specific metals. MIG welding is used for steel, stainless steel and aluminum alloys. FCAW welding is used on applications involving carbon steel, stainless steel and low-alloy steels. TIG welding is used for ferrous metals such as steel and nonferrous metals such as aluminum. SMAW welding is practical only on steel, stainless steel and cast iron.
Cat Class Code
975-6530
Acetylene Cylinder, Size 5, 330 cubic ft.
- 251 PSI
- Actual volume of gas in the cylinder may fluctuate based on numerous conditions
- Durable steel body
- Meets DOT and/or ISO regulations
- Uses: Ideal for production line welding in factories, shipyards, construction sites, and jobsites, for metal fabrication, maintenance, and repair
- Add this acetylene cylinder to your cart
Cat Class Code
975-5130
Angle Head For Machine Torch
Cat Class Code
975-1810
Arc Welding Gun, Cable Lead 6 ft., Air Powered
- MIG welding gun with 6' lead attached
- Pneumatic-powered gun
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Male connector
- Uses: Ideal for MIG or gas metal arc welding (GMAW)
- Add this MIG welding gun to your cart now
Cat Class Code
975-5145
Argon Gas Regulator Double Flow Meter
- Perfect for hooking up the same tank to multiple machines
- Accurately measures and displays gas flow
- Large, easy to read, shatter-resistant flow meter gauge
- Great for Miller, Lincoln, Hobart, HTP and most other welders
- Uses: Ideal for production line welding in factories, shipyards, construction sites and jobsites requiring argon welding applications
- Add this argon gas regulator double flow meter to your cart
Cat Class Code
975-6446
Double Cut Bevel Torch Arm
- Enables simultaneous carrying of 2 machine-type torches
- Allows independent height, lead and degree of bevel adjustments
- Permits adjustment of spacing between torches
- Lightweight aluminum construction
- Uses: Light industrial pipe beveling and cutting applications
- Add this double cut bevel torch arm to your cart
Cat Class Code
975-6750
Dual Torch Oxy/Acetylene Hose, 100 ft.
- 100' length
- Allows dual use of both oxygen and acetylene
- 1/4" size hose
- Maximum 200 psi
- Uses: Use this oxyacetylene torch hose for oxygen and acetylene torch welding and cutting maintenance and repair projects
- Add this dual torch oxy/acetylene hose to your cart
Cat Class Code
975-6540
High Pressure Steel Oxygen Cylinder, 125 cubic ft.
- Industrial steel cylinder
- 249 cubic feet of oxygen
- Commonly used in laser and plasma cutting
- Meets DOT and/or ISO regulations
- Uses: Ideal for oxygen welding applications and general metal fabrication
- Add this high pressure steel oxygen cylinder to your cart
Cat Class Code
975-6545
High Pressure Steel Oxygen Cylinder, 250 cubic ft.
- Industrial steel cylinder
- 250 cubic feet of oxygen
- Commonly used in laser and plasma cutting
- Meets DOT and/or ISO regulations
- Uses: Ideal for oxygen welding applications and general metal fabrication
- Add this high pressure steel oxygen cylinder to your cart
Cat Class Code
975-2300
Industrial Grade Air Arc Gouging Torch
- Heavy-duty carbon arc air gouging
- Copper-clad electrodes
- High-temperature safe handle
- High heat- and abrasion-resistant cable hose
- Uses: Shipyards or jobsites where gouging, joint preparation, removing of pores and cracks, chamfering, cutting, surface treatment, and hole piercing of all metals is required
- Add this air arc gouger to your card
Cat Class Code
975-6716
Inert Gas Purge Hose, 25 ft., with Fittings
- Maximum working pressure: 200 PSI
- For MIG and TIG welding applications
- Made of vinyl for durability
- Connects the regulator flow meter to your welding machine or wire feeder
- Uses: Ideal for use before brazing, leak testing or flushing drainage lines
- Add this inert gas purge hose to your cart
Cat Class Code
975-5125
Machine Torch Long Barrel
Cat Class Code
975-5135
Machine Torch Short Barrel
Cat Class Code
975-5175
MIG Welding Cart
- Made with heavy gauge steel for strength and durability
- Stable platform gives you a low center of gravity
- Easy-rolling wheels for better rolling over cables and other jobsite obstacles
- Adds portability and flexibility to your location on the jobsite
- Uses: Use to carry oxygen and acetylene cylinders for MIG welding applications
- Add this MIG welding cart to your cart
Cat Class Code
975-5165
Mixing Barrel For Oxygen Acetylene Rig
Cat Class Code
975-0345
One-piece Cam-Lok Terminal Adaptor
- Male plug on one end and a Cam-Lok receptacle on the other end
- Allows interconnection to most other types of cable connectors
- Heat- and oil-resistant cover
- Compatible with Miller Tweco-style connectors
- Uses: Ideal for welding cable connections for production line welding in factories, shipyards, construction sites, and jobsites, for metal fabrication, maintenance, and repair
- Add this one-piece cam-lok terminal adapter to your cart
Cat Class Code
975-5170
Oxygen/Acetylene Rosebud Heating Tip
- Copper gas tube with angled tip
- Female threaded brass coupling with hex bolster
- Multiflame heating head
- Helpful in confined work spaces
- Uses: Ideal for heat treating, straightening and priming
- Add this oxygen/acetylene rosebud heating tip to your cart
Cat Class Code
975-6580
Oxygen/Acetylene Torch Handle Attachment
- Industrial quality torch for reliable oxygen/acetylene cutting operations
- Two stainless steel needle valves
- Tough extruded brass torch handle
- Sturdy, reliable connectors
- Uses: Ideal for production line welding in factories, shipyards, construction sites, and jobsites, for metal fabrication, maintenance, and repair
- Add this oxygen/acetylene torch handle attachment to your cart
Cat Class Code
975-6410
Oxygen/Acetylene Welding and Cutting Torch Kit
- Compact design stores easily
- Regulators provide efficient and dependable control of gases
- Includes reverse flow check valves for added safety
- Readable and legible dual scale 2" gauges.
- Uses: Ideal for oxygen-acetylene use to heat, weld, braze, silver-solder, and cut for auto repair, HVAC applications, and general maintenance.
- Add this oxygen/acetylene welding and cutting torch kit to your cart
Cat Class Code
975-2525
Pin and Sleeve Plug, 60 amp, Male
- Copper-free aluminum with electrostatically applied epoxy
- 60 amps
- Engineered to withstand the toughest extremes in climate
- Watertight
- Uses: Ideal to help match high-current power sources
- Add this pin and sleeve plug to your cart
Cat Class Code
975-1020
Pipe Beveling Machine 1 1/2-4 in.
- Torch is not included and requires a minimum length of 10" with a barrel diameter of 1-3/8" for full range capabilities.
- Weighs just 19 lbs.
- Includes a complete set of standard mounting legs and pipes.
- Fully adjustable torch carrier assembly for selecting torch angle
- Uses: Ideal for cutting and beveling pipes
- Add this pipe beveler to your cart now
Cat Class Code
975-1043
Pipe Beveling Manual Saddle Machine, 12-20 in.
- For shop or field applications
- Precision spacer bolts, located on both sides of saddle
- Can be used with most oxy/fuel or plasma machine torches
- Use to create the angle formed between the edge of the end of a pipe or tube
- Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
- Add this pipe beveling manual saddle machine to your cart
Cat Class Code
975-1044
Pipe Beveling Manual Saddle Machine, 20-26 in.
- For shop or field applications
- Precision spacer bolts, located on both sides of saddle
- Can be used with most oxy/fuel or plasma machine torches
- Use to create the angle formed between the edge of the end of a pipe or tube
- Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
- Add this pipe beveling manual saddle machine to your cart
Cat Class Code
975-1045
Pipe Beveling Manual Saddle Machine, 24-30 in.
- For shop or field applications
- Precision spacer bolts, located on both sides of saddle
- Can be used with most oxy/fuel or plasma machine torches
- Use to create the angle formed between the edge of the end of a pipe or tube
- Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
- Add this pipe beveling manual saddle machine to your cart
Cat Class Code
975-1030
Pipe Beveling Manual Saddle Machine, 3-8 in.
- For shop or field applications
- Precision spacer bolts, located on both sides of saddle
- Can be used with most oxy/fuel or plasma machine torches
- Use to create the angle formed between the edge of the end of a pipe or tube
- Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
- Add this pipe beveling manual saddle machine to your cart
Cat Class Code
975-1046
Pipe Beveling Manual Saddle Machine, 30-36 in.
- For shop or field applications
- Precision spacer bolts, located on both sides of saddle
- Can be used with most oxy/fuel or plasma machine torches
- Use to create the angle formed between the edge of the end of a pipe or tube
- Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
- Add this pipe beveling manual saddle machine to your cart
Cat Class Code
975-1040
Pipe Beveling Manual Saddle Machine, 6-12 in.
- For shop or field applications
- Precision spacer bolts, located on both sides of saddle
- Can be used with most oxy/fuel or plasma machine torches
- Use to create the angle formed between the edge of the end of a pipe or tube
- Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
- Add this pipe beveling manual saddle machine to your cart
Cat Class Code
975-7500
Plasma Cutter, 120-575 volt
- Hand-held or machine torch
- For cutting from 3/8" to 1-1/2"
- 20-25' lead
- Great for Miller, Lincoln, Hobart, HTP and most other welders
- Uses: Ideal for production line welding in factories, shipyards, construction sites and jobsites requiring argon welding applications
- Add this plasma cutter to your cart
Cat Class Code
975-7525
Plasma Cutter, 7/8 in. Capacity, 209-230 volt
- Hand-held torch with 20' cable
- Cuts up to 7/8" mild steel
- 209-230 volt
- Great for Miller, Lincoln, Hobart, HTP and most other welders
- Uses: Ideal for production line welding in factories, shipyards, construction sites and jobsites requiring argon welding applications
- Add this plasma cutter to your cart
Cat Class Code
330-5110
Platform Push Cart, 2,000 lbs. Capacity
- 13-gauge steel deck
- Removable handle to fit either end
- 6" caster wheels, 2 swivel and 2 rigid
- Sturdy and durable
- Add this push cart to your cart now
Cat Class Code
975-2261
Potentiometer Extension Cable, 100 ft.
- Extension cable to allow positioning in the shop or on the jobsite
- For use with potentiometer for welding
- Cable is built to be resistant of contaminants
- 100' extension cord
- Uses: Use to attach potentiometer in convenient jobsite location when you may be farther from your welding machine
- Add this potentiometer extension cable to your cart
Cat Class Code
330-5020
Pull Cart
- Lightweight and easy to operate
- Portable
- Suitable to move various solid materials on jobsites
- Durably constructed
- Uses: Ideal for moving smaller office or industrial materials on jobsites
- Add this cart pull to your cart now
Cat Class Code
975-4525
Pulse MIG Water-cooled Gun Kit, 350 Amp
- Input Power Requires 3- or 1-Phase Power, 50/60 Hz
- Air carbon arc cutting and gouging
- Net weight: 80 lbs.
- Flux cored
- Uses: Ideal for high-ampage welding applications
- Add this pulse gun to your cart now
Cat Class Code
975-2264
Remote Amperage Control Foot Pedal for TIG Welding
- Innovative smart connector for TIG torch
- 6' cord
- Provides optimum amperage needed for any TIG welding project
- Provides a variable resistance output in a pedal-style housing
- Uses: Ideal for regulating amperage for TIG welding
- Add this remote amperage control foot pedal for TIG welding to your cart
Cat Class Code
975-2268
Remote Welding Hand Current and Contractor Control Box
- Provides remote current control and on/off contactor switch
- Oversize knob provides easy adjustment
- Tough, durable steel housing
- Convenient for use anywhere on the jobsite
- Use for welding when work requires you to be 50' or more from your machine
- Add this remote welding hand current and contractor control box to your cart
Cat Class Code
975-6705
Single-line Argon Hose, 50 ft., with Fittings
- 50' length single-line
- Abrasion-resistant cover
- For use with argon gas only
- Durable and safe connections
- Uses: Ideal for production line welding in factories, shipyards, construction sites and jobsites requiring argon welding applications
- Add this single-line argon hose to your cart
Cat Class Code
975-1505
Smoke and Fume Extractor, 50-200 CFM
- Dimensions 13.4" by 26.8" by 15.8" for confined spaces
- Weight: 37 lbs. for portability
- Requires 230V single phase input power
- Easily clean the filter using external compressed air
- Uses: Ideal for clearing smoke and fumes in small shops, maintenance areas or small construction sites
- Add this smoke and fume extractor to your cart now
Cat Class Code
975-1510
Smoke and Fume Extractor, 700-1,500 CFM
- Dimensions 36" by 32" by 48"
- Weight 201 lbs. and torque range 1,200-5,200 ft.-lbs.
- Generous airflow between 735-1,500 CFM
- Requires fewer filter changes
- Uses: Ideal for clearing smoke and fumes in larger shops and jobsites
- Add this smoke and fume extractor to your cart now
Cat Class Code
975-6775
TIG Torch, 150 amp, Air Cooled
- Ergonomic and comfortable grip
- Welding amperage 1-150 amps
- United Rentals will contact you to confirm hose and connector requirements
- 60-degree head
- Uses: General purpose welding torch for fabrication, maintenance, aerospace and other applications
- Add this 150-amp torch to your cart now
Cat Class Code
975-6785
TIG Torch, 150 amp, Air Cooled, Flexible Head
- Ergonomic and comfortable grip
- Welding amperage 1-150 amps
- United Rentals will contact you to confirm hose and connector requirements
- 60-degree flexible head
- Uses: General purpose welding torch for fabrication, maintenance, aerospace and other applications
- Add this 150-amp torch to your cart now
Cat Class Code
975-6788
TIG Torch, 200 amp, Air Cooled
- Ergonomic and comfortable grip
- Welding amperage 1-200 amps
- United Rentals will contact you to confirm hose and connector requirements
- 60-degree head
- Uses: General purpose welding torch for fabrication, maintenance, aerospace and other applications
- Add this 150-amp torch to your cart now
Cat Class Code
975-6765
Torch Acetylene Regulator
- Lightweight and easy to handle
- Threads: Acetylene 1/2" output, 5/8" input
- United Rentals will contact you to confirm hose and connector requirements
- To be used on acetylene cylinders
- Uses: Light- to medium-duty welding, cutting and brazing applications
- Add this acetylene regulator to your cart now
Cat Class Code
975-6436
Torch Body Combo Oxygen Acetylene
Cat Class Code
975-6770
Torch Regulator Oxygen
- Lightweight and easy to handle
- Threads: Oxygen 1/2" output, 7/8" input
- United Rentals will contact you to confirm hose and connector requirements
- To be used on oxygen cylinders
- Uses: Light- to medium-duty welding, cutting and brazing applications
- Add this oxygen regulator to your cart now
Cat Class Code
975-0001
Twin Line Welding Hose, 50 ft.
- Grade R or Grade T options available
- 50' length
- United Rentals will contact you to confirm hose and connector requirements
- Allows use of gas for welding or cutting
- Uses: Light- to medium-duty welding, cutting and brazing applications
- Add this twin line hose to your cart now
Cat Class Code
975-6510
Twin-line Oxygen/Acetylene Hose, 25 ft.
- 25' length with inside dual hose
- Oil-resistant covers
- For use with oxygen/acetylene only
- Durable and safe connections
- Uses: Ideal for production line welding in factories, shipyards, construction sites and jobsites requiring oxygen/acetylene welding applications
- Add this twin-line oxygen/acetylene hose to your cart
Cat Class Code
975-6515
Twin-line Oxygen/Acetylene Hose, 50 ft.
- 50' length with inside dual hose
- Oil resistant covers
- For use with oxygen/acetylene only
- Durable and safe connections
- Uses: Ideal for production line welding in factories, shipyards, construction sites and jobsites requiring oxygen/acetylene welding applications
- Add this twin-line oxygen/acetylene hose to your cart
Cat Class Code
975-6400
Two-Tank Oxygen and Acetylene Cylinder Cart
- Holds two tanks on base plate
- High rail design contains cylinders while being moved around the jobsite
- Includes open tool tray
- Adds portability and flexibility to your location on the jobsite
- Uses: Use to carry oxygen and acetylene cylinders for welding applications
- Add this two-tank oxygen and acetylene cylinder cart to your cart
Cat Class Code
975-6404
Two-Tank Oxygen and Acetylene Cylinder Cart
- Holds two tanks on base plate
- High rail design contains cylinders while being moved around the jobsite
- Includes open tool tray
- Adds portability and flexibility to your location on the jobsite
- Uses: Use to carry oxygen and acetylene cylinders for welding applications
- Add this two-tank oxygen and acetylene cylinder cart to your cart
Cat Class Code
330-5025
Warehouse Trash Pushcart, 2,100 lbs.
- Maximum capacity of 2,100 lbs.
- Easy to maneuver, easy to clean
- Corrosion-resistant steel frame
- Sturdy plastic deck
- Uses: Ideal for loading and unloading trash, stock and more
- Add this trash pushcart to your cart now
Cat Class Code
975-3020
Welder Cable AWG #1
- 42.4 square mm cross-section size
- Flexible and durable casing
- American wire gauge 1
- United Rentals will contact you to confirm requirements
- Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
- Add this welding cable to your cart now
Cat Class Code
975-0310
Welder Cable AWG #2/0, 100 ft. Ground
- 67.4 square mm cross-section size
- Flexible and durable casing
- American wire gauge 00 or 2/0
- United Rentals will contact you to confirm requirements
- Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
- Add this welding cable to your cart now
Cat Class Code
975-0311
Welder Cable AWG #2/0, 100 ft., Extension
- 67.4 square mm cross-section size
- Flexible and durable casing
- American wire gauge 00 or 2/0
- United Rentals will contact you to confirm requirements
- Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
- Add this welding cable to your cart now
Cat Class Code
975-0314
Welder Cable AWG #2/0, 50 ft. Extension
- 67.4 square mm cross-section size
- Flexible and durable casing
- American wire gauge 00 or 2/0
- United Rentals will contact you to confirm requirements
- Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
- Add this welding cable to your cart now
Cat Class Code
975-0315
Welder Cable AWG #2/0, 50 ft., Ground Extension
- 67.4 square mm cross-section size
- Flexible and durable casing
- American wire gauge 00 or 2/0
- United Rentals will contact you to confirm requirements
- Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
- Add this welding cable to your cart now
Cat Class Code
975-0236
Welder Cable AWG #4/0, 50 ft., Tweco Ends
- 107.2 square mm cross-section size
- Flexible and durable casing
- American wire gauge #4/0
- United Rentals will contact you to confirm requirements
- Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
- Add this welding cable to your cart now
Cat Class Code
975-0955
Welder Rack, 280 Amp, 4-pack
- Rugged enclosure
- Portable, with lifting eye
- 35% Rated duty cycle
- Input power needed: 40.8 kW
- Uses: Ideal for heavy-duty welding projects
- Add this welder rack to your cart now
Cat Class Code
975-0965
Welder Rack, 350 Amps, 4 Pack
- Housing for multiple power sources
- Two lifting eyes
- Rugged skids
- Safe storage for ground cables
- Uses: Ideal for storing power sources
- Add this welding rack to your cart now
Cat Class Code
975-0950
Welder Rack, 450 Amps, 4 Pack
- Housing for multiple power sources
- Two lifting eyes
- Rugged skids
- Safe storage for ground cables
- Uses: Ideal for storing power sources
- Add this welding rack to your cart now
Cat Class Code
975-2254
Welder Remote Extension Cord
- Extra long extension cord for welder remote control accessory
- Compatible with multiple welder remote rentals
- Increased convenience and safety
- United Rentals will contact you to confirm requirements
- Uses: Connect to a welder remote control for extra distance
- Add this welder remote extension cord to your cart now
Cat Class Code
975-2232
Welder Remote, 3-prong
- Permits remote adjustment of welder output
- Compatible with multiple welder rentals
- Increased convenience and safety
- United Rentals will contact you to confirm requirements
- Uses: Remotely adjust welder output
- Add this welder remote to your cart now
Cat Class Code
975-2231
Welder Remote, 6-pin
- Permits remote adjustment of welder output
- Compatible with multiple welder rentals
- Increased convenience and safety
- United Rentals will contact you to confirm requirements
- Uses: Remotely adjust welder output
- Add this welder remote to your cart now
Cat Class Code
975-2255
Welder Remote, Wired
- Permits remote adjustment of welder output
- Compatible with multiple welder rentals
- Increased convenience and safety
- United Rentals will contact you to confirm requirements
- Uses: Remotely adjust welder output
- Add this welder remote to your cart now
Cat Class Code
975-2250
Welder Remote, Wired, In-line Lead
- Permits remote adjustment of welder output, includes in-line lead
- Compatible with multiple welder rentals
- Increased convenience and safety
- United Rentals will contact you to confirm requirements
- Uses: Remotely adjust welder output
- Add this welder remote to your cart now
Cat Class Code
975-0966
Welder, 350 amp, 6-pack Multi-operator
- Includes 6 welders stored securely in a durable rack
- 350 amps
- Lifting eyes, forklift slots or caster wheels available
- Portable unit
- Uses: Multiple operator welder rack to complete up to 6 welding jobs simultaneously
- Add this welder rack to your cart now
Cat Class Code
975-9999
Welder, Generator and Compressor Kit
- Kit includes welder, generator and air compressor
- 12V battery charger and 12/24V battery booster
- Integrated lift hook and battery tray
- 40 CFM rotary screw compressor
- Uses: Ideal for light- to medium-duty construction, automotive or industrial applications
- Add this welding kit to your cart now
Cat Class Code
975-2018
Welding Cable Lead #2/0, 10 ft., Ground
- Cable lead with ground clamp
- Male connector
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Strong spring and copper-plated jaw
- Uses: Ideal for hooking up to a welding extension or a welding machine
- Add this welding cable to your cart now
Cat Class Code
975-2210
Welding Cable Lead 100 ft., Extra
- Cable lead to connect your stinger or ground
- 100'
- Operating temperatures range from -50°C to +105°C (-58°F to +221°F)
- 30 gauge
- Uses: Ideal for hooking up to a welding extension or a welding machine
- Add this welding cable to your cart now
Cat Class Code
975-2012
Welding Cable Lead 12 ft., Ground
- Cable lead with ground clamp
- Male connector
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Strong spring and copper-plated jaw
- Uses: Ideal for hooking up to a welding extension or a welding machine
- Add this welding cable to your cart now
Cat Class Code
975-2205
Welding Cable Lead 50 ft., Extra
- Cable lead to connect your stinger or ground
- 50'
- Operating temperatures range from -50°C to +105°C (-58°F to +221°F)
- 30 gauge
- Uses: Ideal for hooking up to a welding extension or a welding machine
- Add this welding cable to your cart now
Cat Class Code
975-1950
Welding Cable Lead 50 ft., Ground
- Cable lead with ground clamp
- Male connector
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Strong spring and copper-plated jaw
- Uses: Ideal for hooking up to a welding extension or a welding machine
- Add this welding cable to your cart now
Cat Class Code
975-2005
Welding Cable Lead Whip With Stinger 5 ft., Ground
- Lead with whip electrode holder and ground clamps
- Male connector
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Strong spring and copper-plated jaw
- Uses: Ideal for hooking up to a welding extension or a welding machine and grounding to the piece or floor
- Add this welding cable with stinger and ground clamp to your cart now
Cat Class Code
975-0316
Welding Cable Lead With Stinger #2/0, 50 ft.
- Electrode holder
- Male connector
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Strong spring and copper-plated jaw
- Uses: Ideal for hooking up to a welding extension or a welding machine
- Add this welding cable whip with stinger to your cart
Cat Class Code
975-2100
Welding Cable Lead With Stinger 100 ft., Ground
- Lead with electrode holder and ground clamps
- Male connector
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Strong spring and copper-plated jaw
- Uses: Ideal for hooking up to a welding extension or a welding machine
- Add this welding cable with stinger and ground clamp to your cart now
Cat Class Code
975-2025
Welding Cable Lead With Stinger 25 ft., Ground
- Lead with electrode holder and ground clamps
- Male connector
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Strong spring and copper-plated jaw
- Uses: Ideal for hooking up to a welding extension or a welding machine
- Add this welding cable with stinger and ground clamp to your cart now
Cat Class Code
975-2050
Welding Cable Lead With Stinger 50 ft., Ground
- Lead with electrode holder and ground clamps
- Male connector
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Strong spring and copper-plated jaw
- Uses: Ideal for hooking up to a welding extension or a welding machine
- Add this welding cable with stinger and ground clamp to your cart now
Cat Class Code
975-1960
Welding Cable Whip With Stinger
- Electrode holder
- Male connector
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Strong spring and copper-plated jaw
- Uses: Ideal for hooking up to a welding extension or a welding machine
- Add this welding cable whip with stinger to your cart
Cat Class Code
975-0850
Welding Cutting Outfit with Tote
- Light- to medium-duty portable outfit
- Includes: twin hose, cutting attachment, torch handle, regulators
- Popular for general maintenance work
- Tote is convenient for portability on the jobsite
- Uses: Ideal for production line welding in factories, shipyards, construction sites, and jobsites, for metal fabrication, maintenance, and repair
- Add this welding cutting outfit with tote to your cart
Cat Class Code
975-5150
Welding Flow Gauge Regulator, Argon Gas
- Argon regulator with flow meter
- Calibrate argon, helium and carbon dioxide gases
- Polycarbonate flow tube and housing are shock resistant for maximum durability
- Control valve reduces the input pressure
- Uses: Ideal for MIG and TIG welding applications for precise gas flow regulation
- Add this welding flow gauge regulator for argon to your cart
Cat Class Code
975-5155
Welding Flow Gauge Regulator, Nitrogen
- Zinc aluminum housing cap for added strength
- Easy-to-adjust color-coded knob
- Single stage regulator with a 1/4'' flare fitting
- Control valve reduces the input pressure
- Uses: Ideal for nitrogen welding to minimize oxidation
- Add this welding flow gauge regulator for nitrogen to your cart
Cat Class Code
975-6505
Welding Flow Gauge Regulator, Oxygen
- Medium- to heavy-duty
- 2" steel gauge
- One-piece encapsulated seat design
- Control valve reduces the input pressure
- Uses: Ideal to regulate oxygen welding gas pressure and flow
- Add this welding flow gauge regulator for oxygen to your cart
Cat Class Code
975-0127
Welding Ground Clamp , 4/0 Cable Size
- Copper cast upper and lower jaws
- Insulated spring
- Ball point screw to use when securing the welding cable to the ground clamp
- Connect the metal enclosure of your welding machine to the ground
- Uses: Use in any welding task on the jobsite to ground your welding machine
- Add this welding ground clamp to your cart
Cat Class Code
975-2010
Welding Ground Clamp With Whip
- Copper cast upper and lower jaws
- Insulated spring
- Safely ground your welding lead to steel
- Ground clamp
- Uses: Use in any welding task on the jobsite to ground your welding circuit
- Add this welding ground clamp to your cart now
Cat Class Code
975-0126
Welding Ground Clamp with Whip
- 2-4' whip
- Copper cast upper and lower jaws
- Insulated spring
- Connect the metal enclosure of your welding machine to the ground
- Uses: Use in any welding task on the jobsite to ground your welding machine
- Add this welding ground clamp to your cart
Cat Class Code
975-0125
Welding Ground Clamp, Chassis, 25 ft.
- 25' cable
- Copper cast upper and lower jaws
- Insulated spring
- Connect the metal enclosure of your welding machine to the ground
- Uses: Use in any welding task on the jobsite to ground your welding machine
- Add this welding ground clamp to your cart
Cat Class Code
975-4310
Welding Helmet
- Adjustable strap
- Durable lens shade
- Functional and clean
- United Rentals will contact you to confirm requirements
- Uses: Ideal for protecting welding operators from sparks, heat, burns and UV light
- Add this welding helmet to your cart now
Cat Class Code
975-2017
Welding Lead With Stinger #2/0, 10 ft.
- Electrode holder
- Male connector
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Strong spring and copper-plated jaw
- Uses: Ideal for hooking up to a welding extension or a welding machine
- Add this welding cable whip with stinger to your cart
Cat Class Code
975-2015
Welding Lead with Stinger 10 ft., Ground
- Lead with electrode holder and ground clamps
- Male connector
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Strong spring and copper-plated jaw
- Uses: Ideal for hooking up to a welding extension or a welding machine
- Add this welding cable with stinger and ground clamp to your cart now
Cat Class Code
975-6500
Welding Regulator/Gauge, Acetylene
- Medium- to heavy-duty
- 2" steel gauge
- Rugged brass body
- Control valve reduces the input pressure
- Uses: Ideal to regulate acetylene welding gas flow and pressure
- Add this welding flow gauge regulator for acetylene to your cart
Cat Class Code
975-2260
Welding Remote Extension Cable, 100 ft. Cord
- Allows mounting your wired marine remote in convenient location
- Ideal for heavy-duty industrial use
- Compatible with most welders on the market
- 100' extension cord
- Uses: Ideal for use with a welder for added control convenience when working away from your welder on the jobsite
- Add this welding remote extension cable to your cart
Cat Class Code
975-2243
Welding Remote Extension Cable, 100 ft. Cord, 14 Pin
- Allows mounting your wired marine remote in convenient location
- Ideal for heavy-duty industrial use
- Compatible with most welders on the market
- 100' extension cord
- Uses: Ideal for use with a welder for added control convenience when working away from your welder on the jobsite
- Add this welding remote extension cable to your cart
Cat Class Code
975-2248
Welding Remote Extension Cable, 75 ft. Cord, 6 Pin
- Allows mounting your wired marine remote in convenient location
- Ideal for heavy-duty industrial use
- Compatible with most welders on the market
- 75' extension cord
- Uses: Ideal for use with a welder for added control convenience when working away from your welder on the jobsite
- Add this welding remote extension cable to your cart
Cat Class Code
975-2220
Welding Remote Prong Connector, 3 Pin to 14 Pin
- Use for 3 pin to 14 pin
- Oxygen-free, oil-resistant wire
- Reliable amp power flow
- Locking plug
- Uses: Ideal for use to bring generator power to welder
- Add this welding remote prong connector to your cart
Cat Class Code
975-6727
Welding Rod Oven 10 lbs.
- 115/220V
- Lightweight and portable
- Preset or thermostatic temperature control
- Holds up to 20 lbs. of electrodes
- Uses: Ideal for holding electrodes in preparation for welds, preventing damage, moisture and defects
- Add this welding rod oven to your cart now
Cat Class Code
975-6724
Welding Rod Oven 350 lbs.
- Compact design with recessed controls
- Easily removable shelves
- Thermostatic temperature control
- Uses: Ideal for holding electrodes in preparation for welds, preventing damage, moisture and defects
- Add this welding rod oven to your cart now
Cat Class Code
975-6726
Welding Rod Oven 50 lbs.
- 120/240V
- Adjustable thermostat available
- Wheels and handles available
- Lightweight and portable
- Uses: Ideal for holding electrodes in preparation for welds, preventing damage, moisture and defects
- Add this welding rod oven to your cart now
Cat Class Code
975-6723
Welding Rod Oven, 300 lbs.
- Circular oven chamber for consistent heating
- Single or three-phase
- Thermostatic temperature control
- Two 500 W heating elements
- Uses: Ideal for storing welding rods and electrodes and preventing them from absorbing moisture
- Add this welding rod oven to your cart now
Cat Class Code
975-6728
Welding Rod Oven, 400 lbs.
- Volts: 120/230
- Holds electrodes from 10-18"
- Temperature range 150-550°F
- Single-phase, 1,200 W
- Uses: Ideal for storing welding rods and electrodes and preventing them from absorbing moisture
- Add this welding rod oven to your cart now
Cat Class Code
975-7800
Welding Safety Screen Accessory
- Safety accessory for welding rigs
- Made from flame-resistant material
- Can stand up to the heat of welding work
- Secure and easy setup
- Uses: Ideal for enclosing your welding work area to contain spatter and sparks
- Add this welding safety screen to your cart now
Cat Class Code
975-6585
Welding Torch Single Flint Striker
- Long-life lighter with generous flint
- Rotating wear-resistant file
- Nickel-plated hood
- Ignite your torch under all working conditions
- Uses: Ideal for safely lighting welding and cutting torches
- Add this welding torch single flint striker to your cart
Cat Class Code
975-3060
Wire Feeder In-line Lead
- Works for MIG, Pulse, RMD and FCAW
- Single or 3-phase
- Input: 14-100 VDC or 250-575 VAC
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Uses: Ideal for MIG, Pulse, RMD and FCAW welding
- Add this welding wire feeder lead to your cart now
Cat Class Code
975-0157
Wire Feeder MIG
- Drive roll accessibility
- Remote voltage control
- Rugged, durable case
- Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
- Uses: Ideal for MIG welding
- Add this welding feeder to your cart now
Cat Class Code
975-0156
Wire Feeder MIG, Semiautomatic
- Speed range selection
- Rugged, durable case
- Trigger interlock switch available
- Voltage polarity switch available
- Uses: Ideal for MIG welding
- Add this welding feeder to your cart now
Cat Class Code
975-5140
Wraparound Pipe Marker
- Includes several measurements for utility pipes
- Lightweight and portable
- Easy to use
- Several pipe sizes are available
- Uses: Ideal for marking a straight line on various pipes, including water, gas and other utilities
- Add this pipe marker to your cart now