Skip to main content
Buying or renting a welder? To figure out what welder you need, you’ll need to decide what type of welding process is best for your application. The welding process you choose will depend on factors such as the type and thickness of your materials, the environmental conditions you’ll be working in, your skill level and your time constraints.   Read up on four of the most popular welding options below.   MIG welding   One of the easiest welding processes to learn is MIG (metal inert gas) welding, aka gas met

What Welder Do I Need?

The right welder can literally help your project come together. 

Buying or renting a welder? To figure out what welder you need, you’ll need to decide what type of welding process is best for your application. The welding process you choose will depend on factors such as the type and thickness of your materials, the environmental conditions you’ll be working in, your skill level and your time constraints. 

Read up on four of the most popular welding options below. 

MIG welding 

One of the easiest welding processes to learn is MIG (metal inert gas) welding, aka gas metal arc welding (GMAW). A MIG welder uses a continuously fed solid wire electrode that melts to bond two base materials together. An inert shielding gas (carbon dioxide and argon/CO2 blends are the most common) contained in a separate bottle is also passed through the welder to prevent exposure of the molten weld pool to airborne contaminants.

As this technique melts an electrode to act as a filler material, it’s often used for welding together various metals and alloys (steel, stainless steel, aluminum alloys) ranging from extremely thin (starting at 24-gauge) to 1/2-inch thick. 

Before using a MIG welder, on many models you’ll need to set the voltage and the wire feed speed. These models include a chart with suggested voltage settings based on material type and thickness. Other models adjust the settings automatically after a series of dial inputs.

MIG welders generally have a duty cycle of 30 percent to 50 percent, so you can expect three to five minutes of continuous arc welding out of every 10 minutes. 

Flux-cored arc welding (FCAW)

If your next welding project involves both heavy materials and the possibility of working outdoors, you might want to consider a flux-cored arc welder (FCAW) for the job. It uses a similar power supply as a MIG welder (in some cases, the same one) as well as a continuous wire feed, but it does not use an external shielding gas. Instead, a flux compound within the hollow electrode wire reacts with the welding arc to generate the gas that protects the weld pool from oxidation. This shielding process makes FCAW appropriate for outdoor welding work, where wind might otherwise interfere with the bonding process. If needed, additional shielding can be integrated with an external gas tank. 

With the proper filler metal and flux composition, this type of welding works well for applications involving carbon steel, stainless steel and low-alloy steels. Non-ferrous metals such as aluminum, brass, gold and nickel will not work with this process. Thanks to its flux compound, FCAW is more tolerant of base metal contaminated by dirt, rust or paint.

Duty cycle on FCAW is generally about 40 percent, so you can expect three to four minutes of operation out of every 10 minutes.

TIG welding 

Similar to MIG welding in its use of an inert gas for shielding, TIG (Tungsten Inert Gas) welding, aka gas tungsten arc welding (GTAW), differs in its use of a non-consumable tungsten electrode. Unlike the electrode in a MIG setup, this one does not burn up; the tungsten acts as a torch that melts the metal or a filler material. This makes TIG a practical choice for applications that require a clean appearance. TIG welding is also valued in tight quarters because of the lack of smoke, fumes or sparks.

Because TIG is applicable to both ferrous metals and non-ferrous metals such as aluminum, it’s used often in industries that require high-quality welds, such as aerospace and shipfitting, as well as in the military. Thanks to its ability to operate at low amperages, it’s also used for welding extremely thin materials such as foils and lightweight metal sheets. The only metal TIG isn’t suitable for is cast iron.

The increase in quality comes with a long learning curve. Unlike MIG welding, which can be picked up fairly quickly, it takes time to learn the nuances of TIG to avoid overheating and cracking the metal being bonded. TIG also requires a constant current power source. AC should be used when welding aluminum.

Stick welding 

One of the most common arc welding techniques, shielded metal arc welding, or SMAW, also called “stick” welding, uses a flux-coated electrode (the stick) to form the weld. Similar to FCAW, electricity passing through the electrode reacts with a flux compound to generate the necessary shielding gas. This gives the welder a big advantage when working on projects in unfavorable environments such as wind or rain.

Portability and lower sensitivity to dirt or paint at the weld point makes stick welders a popular option for use in remote locations. This type of welding is practical only on steel, stainless steel and cast iron.

Downsides of stick welding include the high skill level required and associated downtime. Electrode sticks can be only so long, and work must be stopped to replace them once they’re consumed. In addition to limitations with thinner metals, stick welding is also slow and requires slag to be chipped away after welding is complete. Common applications include pipelines, farm machinery and even underwater welding.

Duty cycle on stick welding is generally less than 25 percent, so you can attain roughly 2.5 minutes of welding operation out of every 10 minutes. A DC/AC welder power supply is best. 

It goes without saying that you should have the proper training and experience necessary to undertake any welding techniques and procedures.  Furthermore, you should adhere to all manufacturer specifications regarding the use and operation of any welding equipment and/or accessories that you are employing for your job. 

In addition, United Rentals carries a wide variety of portable and trailer-mounted arc welders , including 2-in-1 machines that offer both welding and generator power, convenient for jobsites where electrical outlets aren't readily available. It also offers welding accessories ranging from safety helmets to cable extensions.  To inquire as to the availability of welders and welding accessories for your next project, contact a United Rentals sales representative at a branch near you or call 1-833-480-0609.


Michael D’Estries is a freelance writer who specializes in science, innovation and the arts.

Subscribe to Project Uptime

Stay up-to-date on the latest news & advice.
Subscribe
Was this article helpful?