Can't find what you need?
Contact us for any further questions you may have about United Rentals.
26ft Power Material Lift
- Cat Class:
- 330-8178
Product description
The 26ft Power Material Lift is a purpose-built indoor material lift for raising heavier loads to greater height in noise-sensitive and occupied spaces. With a platform height of 8m and a lift capacity of 550kg, it carries materials up to high racking, mezzanines, ceilings, and services where extra reach and payload are needed. The all-electric drive is smooth, quiet, and emission-free, suiting it to data centres, commercial buildings, and indoor sites where diesel and engine noise are off the table. An auto-levelling function and fully wireless remote let the operator set up and lift safely from a distance on uneven floors. This is a load-only machine — no personnel are carried on the platform. Make, model and specifications may vary. Stocked models include but are not limited to those pictured.
- Maximum platform height 8m for high-level indoor material handling
- Lift capacity 550kg of materials (load only - no personnel on platform)
- Large 2.71m × 1.08m platform with 6 tie-down points
- Auto-levelling function (front-back 10°, side-side 15°)
- All-electric, zero-emission drive for quiet operation in occupied spaces
- Fully wireless remote control for operation at a safe distance
- Drives at full height; 24V maintenance-free batteries
- Compliant with the relevant requirements of AS 1418.10:2025
Specifications
SWIFT PML08 | |
|---|---|
Model Size | 26 ft |
Platform Height | 8 metres |
Length | 2.71 metres |
Width | 1.18 metres |
Weight | 2550 kg |
Capacity | 550 kg |
Product Features
The 26ft Power Material Lift handles the bigger lifts - more height and more than double the payload of the smaller unit - while keeping the same quiet, clean, indoor-friendly operation. The all-electric drive produces no fumes and runs quietly enough for occupied buildings, and an auto-levelling function compensates for uneven floors before lifting. Its long 2.71m platform takes oversized loads, and the wireless remote keeps the operator clear during set-up and travel. Your branch can confirm availability in your area.
Key features include:
- Maximum platform height 8m, machine weight 2,550kg
- Lift capacity 550kg, with a 2.71m × 1.08m platform and 6 tie-down points
- Load limits up to 5m long, 1m wide, 1m high
- Auto-levelling function: front-back 10°, side-side 15°
- All-electric, zero-emission drive for noise-sensitive and occupied environments
- Fully wireless remote control for safe-distance operation
- Drivable at full height for repositioning loads on site
- 240V (4×6V) DC battery; 24V maintenance-free batteries
- Driving speed 0-3.2 km/h stowed, 0-0.8 km/h raised
- Turning radius 2.45m and 1.85m wheelbase for stability
- Purpose-built indoor material lift, compliant with AS 1418.10:2025
Related Products
-
19ft Power Material Lift
-
18ft Duct Lifter 